The PE spiral pipe making machine is specially designed with sizing cooling method: the production range is 20-200mm, and the production speed can reach 0.6-1.5 meters. Spiral distributed fluid separation, large flow space, to ensure that the melt has enough residence time. The internal stress of the pipe is small, and the inner and outer surfaces are smooth. The high-flexible PE carbon spiral pipe production line is suitable for co-extrusion of all polyolefin materials, and can be extruded into two-layer and three-layer spiral reinforced pipes of different specifications.
Screw &screw tube material：38CrMoAlA Nitriding treatment
Heater：cast Aluminum heater
Cooling system:1/2HPfan cooling 180W
Temperature instrumentation:Omron product
Inverter:ABB
Contactor:Schneider
Specification:50,100,150（By drawing or samples).
Calibration sleeve:Copper sets of material by the polishing treatment.
Calibrator Transmission:Chain Drive.
Pipe application scope:Ф50-Ф150mm.
Material:Stainless steel.
Move motor power:0.75KW.
Vacuum pump power:5.5KW.
Vacuum pump model:Water circle.
Water pump power:4KW.
Pipe Application Range:Ф50-Ф150mm.
Rubber piece type:V Rubber block.
Effective hauling length:1800mm.
Hauling motor power:3KW.
Hauling speed:0.3-3M/min.
Drag working style:Hard cylindrical pipe.
winder:
Winding application:50-150mm.
Winding form:Single take-up.
Drive motor:Torque motor.
The PE spiral pipe making machine is used to produce cable protection pipes, and has been widely used in the ground covering engineering of urban street lamp lines, the laying and ground covering of electrified railway power communication cables, the construction and renovation of highway power communication facilities, and the cable ground covering engineering in residential quarters. Buildings, parks, large entertainment venues, etc.
1.The PE spiral pipe making machine adopts a special single-screw extruder, which has the advantages of high extrusion speed and high speed.
2.Special separate compound screw and die head, helical structure and reasonable channel, suitable for producing smooth inner and outer pipes.
3.The unique calibration and cooling method can produce pipes with a diameter of 50-200mm, and the production speed can reach 0.4-1.5m/min.
4.Standard design of tube mold.
5.The spiral copper sizing sleeve has a cooling device and a powerful vacuum device. Tubes are suitable for high-speed extrusion.
6. Specially designed high-efficiency pump and special nozzle provide high-efficiency spray cooling, the motor can be adjusted longitudinally, and three-dimensional adjustment can be achieved up, down, left, and right.
| Model | SJ90/30 | SJ65/30B |
|---|---|---|
| Pipe Diameter（mm） | 50-200 | 20-125 |
| Calibate Unit | SGZL-200 | SGZL-125 |
| Haul-off machine | SLQ-200 | SLQ-200 |
| Winding machine | SQ200 | SQ200 |
The company is a national fixed-point enterprise in plastic machinery research and development, production and sales.
